// #eevblog — 2021-02-15
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
00:57:24 <electrohead> o/
01:05:33 <steve30> My video is uploading to youtube
01:15:18 <Kuschelpony> rust_collector, can you ohm it out, or measure inductivity?
01:16:58 Join: coppice ([email protected]) to #EEVblog
01:20:29 <rust_collector> yea, but I would have to desolder all the windings from "pins" to separate things, i think. some pins have 2 wires, some have one. I just think it looks a bit weird. I guess I will take it apart, so I can be sure of what I am measuring. But I can "beep" any of the output pins, and they are all beeping.
01:22:20 <Kuschelpony> oh i did not ment to desolder, but to measure milli-ohms from pin to pin or millihenries
01:22:42 Quit: coppice ([email protected]) Quit: Konversation terminated!
01:25:13 Join: coppice ([email protected]) to #EEVblog
01:26:13 <rust_collector> I can. but in the end, it looks like (in the way it is connected now) there are 2 center tapped windings, which are connected in series, with a center tap. so, it has 5 output pins. (plus a separate little 4.5v winding)
01:27:13 * electrohead center taps rust_collector
01:27:43 <rust_collector> I just wonder if I can split it into 2, or maybe 4 different windings
01:28:21 <rust_collector> we will see.
01:30:43 <rust_collector> does any of that make sense?
01:32:02 <electrohead> going to cut it?
01:32:04 <electrohead> :p
01:32:28 <rust_collector> not "it" but I might cut something
01:32:29 <hsn> rust_collector, cant be done with lcr meter without desoldering ?
01:33:24 <rust_collector> checking what the different windings that are soldered together are? i don't know?, I sort of... don't know
01:34:35 <hsn> hmmm ,, me 2
01:34:53 <hsn> but i was watching the "diode gone wild" channel guy
01:35:08 <hsn> he use it for sort of identifying transformer stuff
01:35:16 <rust_collector> yes, he does.
01:36:09 <rust_collector> hmm, I think the "transistor tester" does inductance, to some degree
01:37:07 <Kuschelpony> hmm, seems to be a standard transformer for several different voltages
01:37:13 <hsn> this wild guy with his funny accent makes you feel stupid by holding EE certificate and not knowing stuff ..
01:37:15 <hsn> :D
01:37:46 <Kuschelpony> oh and in this case i am sure a LCR meter works well enough without desoldering, as the voltage is low enough to not turen on PN junctions, and the paralell capacitances are too small to make major errors
01:37:58 <Kuschelpony> did such measurements many times
01:38:32 <electrohead> I normally desolder components when I need to check/test them
01:38:37 <electrohead> it's not hard :p
01:38:58 <rust_collector> uhm, pn junctions?
01:39:03 <Kuschelpony> btw: did you know that there were some ATX supplies which do not make 5V and 12V paralell, but 5V and 7V in series, so the "5V" output could also sink the whole amps that the 12V output can deliver
01:39:07 <hsn> electrohead, its hard when u have only lighter and sulfer matches
01:39:32 <electrohead> hsn: that's when you invest in more proper equipment :P
01:40:37 <hsn> sadly i need a proper lab because this crap table is not enough for me
01:42:44 <hsn> https://photos.app.goo.gl/khs7rShbXiQu8JDr6
01:50:52 <Tw|tch> buy a sheet of 4x8 plywood and some cheap saw horses, rip the plywood to a depth that is comfortable to you. -- instant desk/bench setup.
01:51:14 <Tw|tch> not pretty, but will get the job down.. tons of working space.
01:51:18 <Tw|tch> done *
01:51:41 <rust_collector> https://ibb.co/8YzGJqG
01:52:19 <rust_collector> Not that I trust these measurements much
01:54:58 <Kuschelpony> hsn, maybe one day we can meet and i bring a few suitcases with measuring equip,ment :)
01:55:55 <rust_collector> hsn, in return, maybe you should offer him a toilet?
01:56:51 <hsn> if own one
01:56:57 <hsn> :'(
01:57:42 <hsn> in 2022 i will go to big boss and tell him increase my salary to 4000$ or i will become jobless
01:57:58 <hsn> or i hope to go to him lol
02:00:02 <rust_collector> you are the toilet guy... you can figure something out
02:00:34 <hsn> its not usefull when people think their poop is their friend
02:02:07 <rust_collector> well, maybe some date based things then
02:04:47 <hsn> Yes thats good
02:04:58 <hsn> Kuschelpony: i ll date u
02:05:22 <rust_collector> eeeh. close enough, maybe
02:05:45 Quit: Dantali0n ([email protected]) Ping timeout: 121 seconds
02:07:30 <hsn> Tw|tch: https://images.app.goo.gl/8CQZvXhL4ZefWdy59
02:07:50 <hsn> This ? Idk if i can even find cheap saw horses in my country
02:09:01 <rust_collector> saw horses are not magic. you can make them
02:11:32 <hsn> Seems like good idea .. to build my self a work bench table
02:11:48 <hsn> 2x1 meter ?
02:11:55 <Tw|tch> https://www.instructables.com/Simple-Plywood-Desk-Desk-10/
02:12:01 <Tw|tch> 'something' like that
02:14:14 <rust_collector> or if you find a door, you can use that.
02:15:15 <Tw|tch> a google image search for '4x8 plywood desk' will give you a ton of ideas.. all pretty simple to do -- and yeah, an old door works good as well.. just about anything can work really.
02:15:46 <rust_collector> or you can do like me, and just get a desk...
02:16:47 Join: Dantali0n ([email protected]) to #EEVblog
02:17:21 <Tw|tch> yeah, I did that once.. didn't last long, never enough room on a standard desk. not for me anyway.
02:18:51 <rust_collector> not for me either. but it beats laying on the floor
02:19:06 <Tw|tch> true
02:19:41 <hsn> Desk?
02:19:51 <Tw|tch> here is a old picture of my desk setup: https:/www.dropbox.com/s/lr4oaycduxsvpla/my_desk.jpg/?dl=0&raw=1
02:20:07 <Tw|tch> things are moved around a bit, but it's still the same 'desk'.
02:20:11 <hsn> https://www.ikea.com/bh/en/p/bekant-desk-white-s19022808/?gclid=CjwKCAiAsaOBBhA4EiwAo0_AnBivfiHUlWQHPmnCRGs5WkYO5JZ-rVLOOLNsTo70xuSunSKMjzQGwhoC6eQQAvD_BwE
02:22:15 <rust_collector> ikea does have tabletops too, and screw on legs. i am not sure what size they have
02:22:38 <hsn> Seems like i can take this 4x8 and cut ot to 2.4x8 plywood ..
02:23:28 <hsn> With that round saw thingy
02:23:37 <Tw|tch> you're going to want it to be 'wider/deeper' than half a sheet of plywood.
02:24:34 <hsn> 65cm deep is nt bad ?
02:24:49 <Tw|tch> like, mine, is 30in/76cm deep
02:24:56 <rust_collector> I would try to have no less than 80
02:24:59 <hsn> For instruments i probably need it to be 70-80cm
02:25:06 <Tw|tch> yeah
02:25:14 <Tw|tch> I should hav etoally went with more..
02:25:32 <Tw|tch> but I cut my stuff out before getting into electronics and stuff.
02:25:32 <hsn> rust_collector: no much space in the room there are other things here
02:25:41 <Tw|tch> as such, I have plans to remake it all just a bit deeper
02:26:03 <rust_collector> I know, I have a fucking piano sitting here, otoh, I can stack a lot of crap on that
02:27:15 <hsn> 3/4inch is good thick ? Also if i want it fancier .. should i go with "dofferent wood type"?
02:28:17 <Tw|tch> yes, 3/4" is good, when you get the plywood, go for 'cabinet grade' and just stain it.
02:29:15 <Tw|tch> I wouldn't go for anything othe rthan standard cabinet grade though, wouldn't try for like 'oak' or anything. -- remember, it's a work desk, it will get scratched, scuffed, etc.. don't want to spend too much on a certain wood type jsut for it to get messed up.
02:29:55 <hsn> Ok
02:30:31 <Tw|tch> but typically, cabinet grade plywood is good quality, and takes a stain nicely.
02:33:24 <rust_collector> if you can get that, then yes.
02:34:18 <hsn> I should get plywood screws right?
02:34:21 <hsn> Self tap
02:34:31 <hsn> No nail rubbish
02:34:36 <hsn> ?
02:34:53 Join: BelleDolphin ([email protected]) to #EEVblog
02:35:03 <hsn> I dont imagine hammering nails into 3/4 side to be good idea?
02:35:23 <rust_collector> right
02:36:19 <rust_collector> try to avoid doing anything on the edges at all.
02:36:31 <hsn> And which one u prefer this https://www.instructables.com/Simple-Plywood-Desk-Desk-10/ .. to use sheet as legs .. or to use the
02:36:49 <hsn> https://images.app.goo.gl/3wwh8HAzDzux6kybA
02:37:01 <hsn> Wood square what ever these called ^
02:37:51 <rust_collector> https://www.ikea.com/bh/en/p/linnmon-adils-table-white-s09929641/
02:38:29 <hsn> Good price actually
02:38:53 <rust_collector> it is not a super awesome table, but it is a table...
02:39:33 <hsn> But i think it will be little weak and short
02:39:41 <hsn> 2 meters is cooler
02:39:45 <rust_collector> sure
02:40:13 <hsn> If i build it from materials i think ill reach double this price but still fine ..
02:40:27 <hsn> Just hope it doesnt be so heavy pr ugly
02:40:32 <hsn> Or npt strong
02:42:16 Quit: BelleDolphin ([email protected]) Quit: http://www.kiwiirc.com/ - A hand crafted IRC client
02:42:43 <rust_collector> 1" steel plate, 80X200cm, then 2 extra pieces 70X75. plenty for what you are doing, imo
02:42:57 <rust_collector> the extra pieses are for legs
02:51:56 Quit: Kuschelpony ([email protected]) Connection closed
02:53:51 Join: BelleDolphin ([email protected]) to #EEVblog
02:54:36 Quit: BelleDolphin ([email protected]) Quit: http://www.kiwiirc.com/ - A hand crafted IRC client
03:04:33 Join: Kuschelpony ([email protected]) to #EEVblog
03:15:28 <rust_collector> hmm, this is not ideal. I can split this thing into 2 32v windings. or 2x14v and 2x18.3v, but I don't think it is a good idea to separate it into 4, as the wires are too close
03:15:34 Join: arch ([email protected]) to #EEVblog
03:40:36 Join: Watcher ([email protected]) to #EEVblog
03:50:12 <hsn> https://photos.app.goo.gl/NYkqLc5HvBZVSXN99
03:50:12 <hsn> Thats it im building this darn table
03:51:01 <rust_collector> ok, what are you putting underneath?
03:53:13 <hsn> rust_collector: like this guy https://photos.app.goo.gl/Z7ZZYCrysFLinowT6
03:53:40 <hsn> One side will be 450 depth which is not good
03:54:57 <rust_collector> i think I would move the rear "wall" up underneath the tabletop, or add a leg in the middle/rear
03:55:35 <hsn> I probaly need these https://photos.app.goo.gl/UZS1P8b6RSVM4k7F9
03:55:37 <rust_collector> if you are using 3/4" ply, that is. but probably even if it is something else
03:56:11 <hsn> Wait i need to understandur wisdoms
03:56:21 <rust_collector> will it go against a wall?
03:56:28 <hsn> Yes
03:57:09 <hsn> rust_collector: the red drawn rectangles are supports .. from rear buttom
03:57:38 <hsn> 1 at front is for putting stuff behind .. like power plug or somthing
03:58:15 <rust_collector> well, i guess you could get away without the leg in the front, by the cutout, if you attach the back to the wall, just to keep it from tipping. if you have a leg or the rear support is up underneath the top, it will probably be sturdy enough
03:58:33 <rust_collector> but if you feel you have room for that leg, then add it
03:58:57 <hsn> The leg is this: https://photos.app.goo.gl/tksvxVFVqJuh6Ucs7 ??m
03:59:12 <rust_collector> yes
03:59:38 <rust_collector> legs are annoying, if you can get by without them
03:59:41 <hsn> There will be 400mm unsupported if i remove it?
03:59:56 <rust_collector> well, it is relative
04:00:07 <hsn> 400x2000
04:00:24 <hsn> Yeah i agree its annoying
04:01:06 <Watcher> and the other red lines a supporting beems?
04:01:47 <hsn> Red lines are supporting plywoods like
04:01:59 <hsn> https://photos.app.goo.gl/Z7ZZYCrysFLinowT6
04:02:11 <hsn> This from the instructubles
04:02:30 Join: MRiddickW ([email protected]) to #EEVblog
04:03:14 <Watcher> if you place a beem (pls correct my spelling) at the short side it will be more sturdy
04:03:18 <Watcher> without leg
04:04:01 <hsn> I could also do this rust i think better than leg ... Less annoying i mean https://photos.app.goo.gl/SJS7fjx5oGUCznHi7
04:04:37 <rust_collector> that is also possible
04:05:05 <Watcher> and the left side if also bolted to the wall?
04:05:27 <hsn> Nothing bolted to wall .. its just near the wall ..
04:06:01 <rust_collector> I think he should at least put a little screw in the wall, to keep it from tipping. if he can. if not, add the last leg
04:06:22 <Watcher> i agree with rusty
04:06:36 <rust_collector> I guess you could put the leg a bit in from the edge
04:06:57 <Watcher> and more to theh wall
04:08:07 <rust_collector> or you can start by stacking old tek thingies in by the wall, and nothing will be able to tip it over
04:08:50 <Watcher> or hang under the table at the backside
04:09:05 <Watcher> stones will also work
04:10:05 <rust_collector> well, they only have sand down there. I have seen pics, and it looks like any stones were imported
04:11:07 <hsn> Let me process ur wisdoms
04:11:28 <hsn> if he can. if not, add the last leg
04:11:33 <hsn> What last leg ..
04:11:33 <Watcher> then sand it a just old stones
04:12:18 <coppice> if stones knew they'd end up as sand, they'd be crushed
04:13:04 <Watcher> lmao
04:13:09 <hsn> Ok .. i can do the following .. take extra plywood for the side support @1600mm .. and then build without it .. if i get the feeling its weak . I attach it ?
04:14:26 <hsn> coppice isnt that aSTONishing joke ..
04:15:24 <Watcher> hsn yes you can do it
04:16:05 <Watcher> and you can then and metal angle things to make it even more sturdy and less wobbly
04:16:48 <hsn> yes all metal angles .. i dont know how else to attach ..
04:17:48 <rust_collector> use all metal, and forget this tree stuff, just weld it just like you want it
04:17:56 <Watcher> you can screw it from the top but ugly or at a angle right in the beem and in the table top
04:20:16 <rust_collector> from the top works, but it is not pretty. you do not need very big metal brackets... and it lets you screw into the correct side of the wood
04:22:59 <Watcher> or use a screw with on bove sides screwtreath
04:24:13 <rust_collector> well, screwing anything into end grain is not ideal. Not that it would matter much here
04:25:45 <Watcher> you are rigth rusty but bye he have wood with the grain in the other side then we two think
04:26:23 <rust_collector> wasn't he going to use plywood?
04:27:12 <rust_collector> don't worry about the leg, he will kick that away sooner or later
04:27:52 <Lord_of_nothing> ☷☰☷☰☷☰☷☰☷☰☷☰☷
04:28:35 <Watcher> a leg from plywood?
04:29:56 <rust_collector> I think the end legs would be? more like an end wall? but the legs in the middle would be wood-wood, but I would not worry too much about those
04:30:21 <rust_collector> but, what does hsn say?
04:31:12 <rust_collector> hsn is busy eating some kind of fruit...
04:31:55 <Lord_of_nothing> ✂
04:32:28 <Watcher> yes plywood 1600mm
04:32:38 <Watcher> or 3/4"
04:33:26 <hsn> lol
04:33:56 <hsn> wood yes .. 2000mm .. one side 1600 to allow me to use my pc table with the chair ..
04:34:06 <hsn> wood joined by L angle brackets (metal)
04:34:22 <rust_collector> but the legs on each end would be...
04:34:57 <hsn> legs are plywood also
04:35:06 <hsn> just like my pc table
04:35:16 <rust_collector> rrrrright
04:35:25 <coppice> '1600mm or 3/4" ' seems like a very poor units conversion
04:35:38 <hsn> https://photos.app.goo.gl/hsmiZ1GnvwxzS8bt9
04:35:41 <rust_collector> it is not easy for us foreigners, lol
04:36:05 <hsn> in bahrain we use both interchangbly
04:36:07 <hsn> coppice,
04:36:12 <hsn> units
04:36:22 <rust_collector> hsn, do you get 3/4" or metric ply down there?
04:36:33 <rust_collector> because metric tends to be thinner
04:36:44 <rust_collector> 18, I think
04:36:44 <hsn> rust_collector, im not sure .. but there will be either this or that "most available in market"
04:37:13 <hsn> im not sure which one will be .. in either case both 18mm/20mm .. or 3/4" thick plywood
04:37:26 <hsn> what ever .. in that region size thingy
04:37:33 <rust_collector> sure
04:37:47 <hsn> pasta time see u
04:37:52 <hsn> l8r
04:38:02 <rust_collector> hmm, passstaaaaaa. there is an idea
04:39:59 <hsn> https://photos.app.goo.gl/1YN9RHWnxumXXTEo9
04:41:22 <Watcher> have they the same chairs all over the world?
04:41:53 <Watcher> you can by the same model chair in every webshop and store here
04:42:18 <Watcher> most time the sitting is a little but differebt
04:42:23 Join: TheDude ([email protected]) to #EEVblog
04:42:44 <Watcher> but the the rest is the exactly the same
04:43:12 <rust_collector> yes, mr pyro
04:47:03 <Watcher> them i have more prove of my theory that fashionable is made by the big brands
04:49:42 <rust_collector> well, there is not much more than ikea, is there?
04:49:51 <rust_collector> in furniture stuff
04:51:24 <Watcher> jyske
04:51:59 <Watcher> *jysk
05:03:01 <rust_collector> well, have that also spread across the world, like the plague....I mean ikea
05:04:15 <Watcher> we have jysk here and also from sweden
05:13:18 <rust_collector> yes, I thought it was a pretty scandinavia and neighbors sort of thing.
05:14:08 <Watcher> scandinavia is not for from here
05:14:55 <rust_collector> the guy who started jysk used to have a small airline, using little cessnas, we used them a bit for hauling mail
05:15:07 <rust_collector> hmmm, benair, I think it was called
05:15:20 Quit: arch ([email protected]) Connection closed
05:16:55 <rust_collector> and no, you might as well be in scandistan now.
05:18:40 <Watcher> `why?
05:19:57 <coppice> we have a jysk near us. Weird place
05:31:18 <rust_collector> it tends to be pretty random
05:38:02 <rust_collector> well, it used to. I have not been there in a few years
06:04:17 <rust_collector> ok, time to watch the steve replace a transistor
06:04:32 <rust_collector> https://www.youtube.com/watch?v=4g3ogYyRr7k
06:16:13 <Ysjoelfir> I love the start :D
06:16:27 <Ysjoelfir> Looking at stuff and then instantly killing it is always a nice achievement
06:17:05 <rust_collector> feel free to request ways to do that.
06:17:52 <rust_collector> I am fairly good at killing things
06:25:49 <rust_collector> hmm, i am still getting used to people saying it it 2021
06:29:29 <Watcher> bye
06:29:33 Quit: Watcher ([email protected]) Quit: i'am out
06:30:13 <rust_collector> yes bye...
06:41:03 <rust_collector> heh, so playing with a 555 module and a 386 module, and a tiny speaker makes the dogs go crazy, and the wife confused
06:43:52 Quit: Kuschelpony ([email protected]) Connection closed
07:25:28 Join: ThunderSqueak ([email protected]) to #EEVblog
07:25:28 Mode: (by ChanOP) +o ThunderSqueak
07:40:16 <Ysjoelfir> so you built a nice dog torture device?
07:40:32 <steve30> hi
07:41:03 <rust_collector> yes. but it seems to be less bad than the previous one, which used the beeper things from 2 smoke detectors
07:41:09 <rust_collector> hi mr steve
07:47:12 <hsn> well
07:47:13 <hsn> im done
07:47:25 <hsn> let see what mr wood can do for me https://snipboard.io/BncEg1.jpg
07:47:44 <hsn> seems like the plywoods here are 1200*2400
07:47:48 <hsn> mm
07:56:33 <Ysjoelfir> so I just ordered a nerdy gurdy
07:56:53 <T3sl4> meowdy https://i.redd.it/fxe3s9nz6ah61.jpg
07:58:11 <rust_collector> hsn, stop nerding, make a desk
07:58:26 <Ysjoelfir> lol T3sl4. looks like our catter
07:58:26 <hsn> rust_collector: im delf isolated remember
07:58:35 * steve30 meows at T3sl4
07:58:42 * T3sl4 tips a hat to steve30
07:58:48 <steve30> o/
07:58:56 <rust_collector> hsn, you can make a desk on your own
07:59:23 <hsn> No .. someone has a shop and good cutter ... Let him cut for me
07:59:36 <hsn> I suck at all hand work
07:59:47 <rust_collector> awww, i was hoping we would get some entertainment
08:00:02 <hsn> Lol?
08:00:07 <rust_collector> eeh
08:00:10 <rust_collector> well
08:00:20 <hsn> You can play with avocados
08:00:58 <rust_collector> are you trying to push your perverted games on me again?
08:01:06 <hsn> Yes sir
08:01:15 <rust_collector> good job!
08:01:29 <hsn> I only reflect your ambitions
08:01:46 <rust_collector> oh, that sounds... impossible
08:01:56 <hsn> U wanted to do avocados and green sperms
08:02:09 <rust_collector> no
08:02:16 <rust_collector> read that again
08:02:53 <T3sl4> avocados are nice
08:02:59 <T3sl4> they're like large testicles
08:03:45 <rust_collector> yes, but do you want to squish large testicles to a green slurry, and do unmentionable things to it?
08:04:27 <rust_collector> not to say there is anything wrong with that. but it is not my favorite thing
08:05:36 <T3sl4> i mean, i like having mine
08:05:43 <T3sl4> i'm not sure one should read into it any further than that
08:08:02 <rust_collector> ok, that is your thing, I am not saying there is anything wrong with that
08:08:22 <rust_collector> maybe
08:10:27 <rust_collector> I think hsns wife is on a girls night, and he forgot his keys inside.
08:18:35 <hsn> Hmm
08:19:17 <hsn> I dont unerstand and i think i dont want to .. xD
08:22:24 <rust_collector> do you think you can make that bench a little bit longer?
08:23:06 <rust_collector> maybe 20 cm longer?
08:25:28 * Ysjoelfir is happy to have got a nice DIY hurdy gurdy kit
08:25:40 * Ysjoelfir now hopes that he will be able to learn to play that thing
08:27:09 <rust_collector> weird things
08:27:45 <Ysjoelfir> hm?
08:28:47 <rust_collector> i think they are weird things. i wonder who invented those
08:28:56 <Ysjoelfir> the swedes
08:29:07 <rust_collector> that explains a lot
08:32:50 <rust_collector> no, actually it does not. but maybe a little bit.
08:33:15 <Ysjoelfir> lol :P I like that they kinda sound like its more than one person playing
08:34:30 <hsn> rust_collector: its 850
08:35:06 <rust_collector> i have to go up in the attic one of these days, to fix some ventilation stuff. maybe I can remember to bring the box with strings on back down from there.
08:35:23 <rust_collector> hsn, I mean the other direction.
08:35:28 <rust_collector> 2.2m
08:35:31 <Ysjoelfir> I would love to know what it is
08:36:17 <hsn> U think it should be longer ?
08:36:17 <rust_collector> I did a quick search the other day, and I did not find one like it, but many sort of similar ones, form many places
08:36:36 <rust_collector> if you can fit it in your space, then yes
08:37:05 <hsn> If its 2.0m the cloth hanger can be in the other corner
08:37:14 <rust_collector> if you end up with it being too long, you can always cut the end off later
08:37:36 <rust_collector> ok, if you don't have room for it...
08:37:48 <hsn> It make sense ..
08:38:10 <rust_collector> just ask Ysjoelfir how it is to have a flat surface in a room you tinker in
08:38:22 <hsn> Let me check with my friend how he is gonna transport it actually
08:38:28 <Ysjoelfir> its great. get as much of those as you possibly can
08:38:52 <rust_collector> yes, because you end up with no flat surfaces, without a lot of stuff on it
08:39:01 <Ysjoelfir> exactly.
08:39:05 <hsn> I told him should i split it into 1meter long to fit car or u will ... Hire a pickup
08:39:07 <Ysjoelfir> don't ask how I know that
08:39:58 <hsn> Wait .. what do u mean with flat surface here
08:40:23 <rust_collector> if he an cut it in the store, I guess an 85cm wide sheet should be doable in most cars, if you can fold down the rear seats
08:40:29 <T3sl4> flat surfaces aren't the problem, horizontal ones are
08:40:41 <rust_collector> blah
08:40:52 <rust_collector> yes
08:41:13 <hsn> I think it can be 1.4m in most cars ..
08:41:50 <rust_collector> probably. maybe
08:42:01 <hsn> https://images.app.goo.gl/atLJovZkNHw5ePLs5
08:43:54 <rust_collector> I mean, i don't have a problem with letting things hang a bit outside of the car. I don't know how people do things down there
08:44:29 <rust_collector> otoh, I have a trailer, so. uhm, yes
08:48:53 <rust_collector> do they make sockets for pentawatt devices?
08:52:50 <hsn> Pentawat
08:56:07 <hsn> https://www.cyberciti.biz/open-source/command-line-hacks/adding-spice-to-your-sudo-session-with-a-lecture-file-on-linux-or-unix/
08:56:14 <hsn> Groot
08:59:03 <rust_collector> weeeely groot
09:00:08 Join: Obri ([email protected]) to #EEVblog
09:03:49 <rust_collector> time for my nap. have enjoys
09:04:19 <Ysjoelfir> gn8 rustz
09:04:35 <hsn> Gn
09:50:00 <EEVBlog> New EEVBlog Retweet: Doomed to investment failure, it's not innovative enough. Needs a spiffy shouty voiceover video with moose at the very least. https://t.co/CiUv7pnXH0 :Which was quoting: Zi time: Après le fiasco de la route solaire, voici l'autobahn solaire, beaucoup plus prometteuse. 🤔 https://t.co/rhuEn3J87n #enr #climat via @GoogleNews
10:11:20 Quit: ThunderSqueak ([email protected]) Ping timeout: 121 seconds
10:44:26 * steve30 hugs Ysjoelfir
10:48:48 * electrohead offers beer
11:30:57 * T3sl4 hugs electrohead
11:35:50 * electrohead hugs T3sl4
11:35:57 <T3sl4> \o/
11:36:37 <electrohead> \o/
11:36:38 <electrohead> hey man
11:37:10 * electrohead hugs T3sl4's head
11:37:18 <electrohead> there, that sounds... weird, but better, oddly
11:37:21 <electrohead> :p
11:37:23 * T3sl4 electrohugs
11:43:54 * electrohead offers Troeg's Blizzard of Hops
11:52:01 <EEVBlog> New EEVBlog Tweet: Have SpaceX actually lowered launch costs due to reusability? SpaceX: BUSTED!! https://t.co/Pr0qXEZrJ1
12:01:49 * Halcyon nibbles on pasta
12:06:06 * T3sl4 sips on port
12:06:27 <T3sl4> think it's time to make some mac&cheddar
12:06:40 <Halcyon> Mmmm yummy
12:06:44 * T3sl4 electrobooms Halcyon
12:06:49 <Halcyon> :)
12:06:59 * Halcyon gives T3sl4 the birb
12:07:16 <T3sl4> mmm, squab
12:36:11 <Halcyon> T3sl4: https://www.youtube.com/watch?v=kKluWuX1lv0
12:36:17 <Halcyon> I'm pretty sure HE is the "queen of the house"
12:37:29 <T3sl4> heh
12:37:31 <T3sl4> true
12:37:42 <T3sl4> still outranked by the cat; princess perhaps
12:37:58 <T3sl4> also, mmm, southwest style mac. chili powder and cumin in it
12:39:02 <Halcyon> That sounds fucking awesome T3sl4
12:39:12 <Halcyon> Can you post the recipe in EEVblog?
12:39:24 <T3sl4> already did
12:39:33 <Halcyon> YEEEEE :)
12:41:18 <T3sl4> though not with exact amounts. i wing it every time, and i wung in this direction tonight
14:16:50 Quit: coppice ([email protected]) Quit: Konversation terminated!
14:30:37 Join: Kuschelpony ([email protected]) to #EEVblog
14:37:52 Quit: Kuschelpony ([email protected]) Connection closed
15:06:24 Quit: TheDude ([email protected]) Ping timeout: 121 seconds
15:41:33 <Halcyon> What the fuck is this: https://www.youtube.com/watch?v=kXiCWFwC88s
15:41:40 <Halcyon> Do people really eat this??!
15:44:44 <T3sl4> mmm, bulk sausage
15:46:28 <Halcyon> This scares me
15:46:55 * T3sl4 injects bulk into Halcyon
16:13:09 Quit: clarkos ([email protected]) Ping timeout: 121 seconds
16:13:40 Join: clarkos ([email protected]) to #EEVblog
16:13:40 Quit: clarkos ([email protected]) Changing hosts
16:16:13 <EEVBlog> New EEVBlog Tweet: Can't wait! Mars Rover Landing CRASH COURSE- 4 DAYS LEFT! https://t.co/CuOkqkzDeB
16:47:57 Quit: clarkos ([email protected]) Ping timeout: 121 seconds
16:48:48 Join: clarkos ([email protected]) to #EEVblog
17:12:32 <EEVBlog> New EEVBlog Tweet: EEVblog Jr on the way to the hospital. It's Schrodinger's wrist at the moment...
17:59:26 <EEVBlog> New EEVBlog Tweet: Replaced the ear pads on my SR850's, very nice! Now super deep and comfy. https://t.co/EPCCEx65YX
18:08:50 <EEVBlog> New EEVBlog Tweet: NEW Video on EEVblog2! Shift Cryptosecurity BitBox02 Crypto Hardware Wallet https://t.co/eTcv9RMMFR
18:45:03 <EEVBlog> New EEVBlog Tweet: Thanks for the video recommendation Youtube, it is excellent, but I'm pretty sure I've watched this one... https://t.co/NgV2XpAefv
18:50:58 Quit: Some_Person ([email protected]) Ping timeout: 121 seconds
18:59:07 Join: Some_Person ([email protected]) to #EEVblog
19:00:32 Quit: MRiddickW ([email protected]) Ping timeout: 121 seconds
19:34:44 Topic Is: Official IRC channel of the EEVblog - www.eevblog.tv
19:34:44 Set By: (Halcyon) on: Fri Jan 24 20:18:27 2020
19:34:44 Quit: Some_Person ([email protected]) [Ping timeout: 121 seconds]
19:34:44 Quit: Ysjoelfir ([email protected]) [Changing hosts]
19:34:44 Join: Ysjoelfir ([email protected]) to #EEVblog
19:34:44 <Ysjoelfir> mornings
19:34:44 Join: Watcher ([email protected]) to #EEVblog
19:36:02 <K> hello peas
19:36:40 <Ysjoelfir> Hello Cucumber
19:37:45 * K cucumbs some
19:39:07 * Ampera bare bear hugs the bare Halcyon bear
20:21:13 Quit: Watcher ([email protected]) Quit: i'am out
20:33:40 <T3sl4> hello bananas
20:33:40 <EEVBlog> Hello there, T3sl4!
20:33:47 <T3sl4> EEVBlog!
20:34:19 <Ampera> I should really start work on a replacement for the EEVBot
20:38:11 <hsn> Ampera: need help in that?
20:38:55 <Ampera> I've thought about open sourcing the whole thing on github or something. I'm planning on writing my own IRC library, which would however be a prerequisite
20:40:18 <Ampera> IRC really isn't a complicated protocol either, I'm just lazy
21:03:23 <hsn> Yea
21:03:34 <hsn> Write it in c plz
21:03:50 <hsn> I dnt like java
21:04:12 <hsn> Im just bullshitting with u .. nvm
21:04:45 <hsn> Man .. the carpenter cut the top part 580mm instead of 850mm lol
21:05:41 <hsn> Now they are going to biscuit joint the wood ..
21:06:00 <Ysjoelfir> idiots
21:06:23 <Ysjoelfir> should replace it completely, a joint is never as rigid as a whole piece
21:06:37 <K> add steel brackets!
21:06:55 <hsn> https://images.app.goo.gl/KC6uo1bvUiRp5x1n7
21:08:06 <hsn> Ysjoelfir: yeah .. but if i replace it its a whole sheet from the worker salary cut .. so i just move on and fix it with brackets and supports from buttom
21:08:19 <Ampera> I'm planning on writing it in C++
21:08:46 <Ysjoelfir> nonono, hsn, THEY should replace it on THEIR costs because THEY screwed up
21:08:46 <Ampera> mostly for the sake of the easier managed datatypes and class system
21:08:47 <K> try rust
21:08:52 <Ampera> why
21:09:19 <Ampera> I could /really/ piss everyone off and write it in C#, that'd make shit real easy
21:09:46 <Ampera> C++ is nice because I can far more easily port it to FreeBSD, which is where the bot currently lives
21:10:39 <hsn> Ysjoelfir: they would .. but it will but cut from carpenter salary .. i tend to not allow .. he has probably 320$ salary... Yes he made the mistake .. but meh .. i live with it xD
21:11:09 <Ysjoelfir> ah, so you do it because you are a generous, kind person. thats ok than :)
21:11:47 <hsn> Well not to the shop but to the worker there .. as i know they will cut it from his salary ..
21:13:04 <hsn> Ampera .. does the socket code stuff compatible with linux?
21:13:23 <Ampera> what socket code stuff
21:13:24 <Ampera> for C#?
21:13:31 <hsn> C++
21:13:40 <Ampera> depends on the library you use
21:13:47 <Ampera> I'll probably use POSIX sockets
21:13:51 <hsn> Ehich one u plan
21:13:52 <hsn> Ok
21:14:08 <Ampera> er, those might be BSD sockets, I might be mixing that up with POSIX threads
21:14:28 <Ampera> turns out it's both
21:15:06 <Ampera> C++ also makes shit like string manipulation not a fun, but dreadful nightmare.
21:15:08 <hsn> According to
21:15:10 <hsn> Wiki
21:15:12 <hsn> Yes
21:15:13 <hsn> The term POSIX sockets is essentially synonymous with Berkeley sockets, but they are also known as BSD sockets,
21:15:21 <hsn> Paste anyway cause i copied
21:19:24 <K> write it in perl
21:20:34 <Ampera> K, what are you, a bad ideas machine?
21:20:43 <K> yes, why?
21:21:42 <Ampera> you're doing a bang up job
21:21:50 <K> thanks!
21:21:53 <K> how about a rise?!
21:22:56 <K> rust source compiles w/o any changes for bsd and linux, in my experience
21:23:13 <Ampera> It does, but C# does not
21:23:20 <Ampera> not easily anyways
21:23:48 <Ampera> BSD support is a bit strained for mono and especially .NET ime
21:34:19 Join: Ysjoelfir_ ([email protected]) to #EEVblog
21:37:11 Quit: Ysjoelfir ([email protected]) Ping timeout: 121 seconds
21:37:11 Nick: Ysjoelfir_ is now known as Ysjoelfir
21:59:09 Join: RichWiskin ([email protected]) to #EEVblog
21:59:29 Quit: RichWiskin ([email protected]) Quit: http://www.kiwiirc.com/ - A hand crafted IRC client
22:04:47 Join: coppice ([email protected]) to #EEVblog
22:07:29 Quit: coppice ([email protected]) Quit: Konversation terminated!
22:10:02 Join: coppice ([email protected]) to #EEVblog
23:15:16 * electrohead pokes random people
23:28:25 Join: Watcher ([email protected]) to #EEVblog
23:31:46 Quit: Watcher ([email protected]) Quit: i'am out
23:35:37 <K> watch your hands mister
23:47:01 * electrohead rinses K with sanitizer
23:48:27 * Ampera sneezes on electrohead's feet
23:49:06 * electrohead slaps Ampera
23:49:10 <electrohead> sup 'n' stuff
23:49:11 <electrohead> :p
23:49:14 <Ampera> how are you doing electrohead
23:49:19 <Ampera> https://cdn.discordapp.com/attachments/489186870995976202/810828558586216448/20210215_060203.jpg
23:49:22 <Ampera> is what's up
23:49:29 * electrohead takes one
23:49:34 <electrohead> that looks good, man :D
23:49:55 <Ampera> er
23:49:58 <Ampera> you're taking raw beef?
23:50:01 <Ampera> o.o
23:52:15 <K> he is an uncultured savage
23:56:05 <Ampera> wait like 10 days until it's actually been cured :P
Search this day's buffer: